420 PC. Skid Plate Assortment Kit

Kit Incldues:

90187 – 7/32″ [5.60mm] Hole Size, 3/4″ Stem, 21/32″ Head – Black Nylon Shield Retainers

90976 – 1/4″ [6.30mm] Hole Size, 13/16″ Stem, 23/32″ Head – Black Nylon Fender & Bumper Shield Retainers

90832 – 5/16″ [8mm] Hole Size – Black Nylon Trim Panel Retainers

90850 – 3/8″ [9.50mm] Hole Size – Black Nylon Radiator Apron Panel Retainers

90509 – 17/64″ [6.80mm] Hole Size, 7.50mm Stem, 18mm Flange – Black Nylon Front Fender Liner Push Type Retainer

90971 – 5/16″ [8mm] Hole Size – Black Nylon Push Type Retainers

90550 – 9/32″ [7mm] Hole Size, 10mm Stem, 20mm Flange – Black Nylon Push Type Retainers

90569 – 5/16″ [8mm] Hole Size, 13mm Stem, 20mm Flange – Black Nylon Push Type Retainers

90974 – 25/64″ [9.90mm] Hole Size, 16mm Stem Length, 20mm Flange Diameter – Black Nylon Front Bumper Push Retainers

90570 – 25/64″ [10mm] Hole Size, 15mm Stem, 18mm Flange – Black Nylon Push Type Retainers

91021 – 5.20mm Stem Diameter, 18.50mm Stem Length, 16mm Head Diameter – Black Finish Phillips Drive Cowl Fasteners

91019 – 4.50mm Stud Size, 13mm Center of Hole to Edge – Zinc Finish Skid Plate “U” Nuts (use w/ #16991)

90039 – 6mm Stem Diameter, 22mm Stem, 25mm Head – Black Nylon Slotted Skit Plate Screw (use w/ #13255)

90667 – 6mm Stud Size, 20mm Width, 16mm Height – Black Nylon Skid Shield Grommets (use w/ #12589)

91022 – 9/32″ [7mm] Hole Size, 20mm Stem, 18mm Head – Black Finish Steel Slotted Drive Cowl Fasteners (use w/ 13254)

91023 – 8mm – Bright Zinc Finish Metric Flat Washers

91024 – 6mm Stud Size, 12.20mm Center of Hold to Edge – Zinc Finish Skid Plate “U” Nuts (use w/ #13253)

91027 – 6-1.00 x 20mm, 10mm Intended Hex Head, 18mm O.D. Loose Washer – Black Finish Dog Point Engine Splash Shield Bolts

91026 – 8-1.25 x 20mm, 12mm Intended Hex Head, 22mm O.D. Loose Washer – Zinc Finish Engine Splash Shield Bolts

90004 – 8-1.25 x 30mm, 12mm Intended Hex Head, 24mm O.D. Loose Washer – Black Finish Type F Point Bolts

90711 – 5-2.12 x 19mm, 14mm Head Diameter – T25 Drive Size – Black Finish Torx Truss Head Screws (use w/ #10937 & #13256)

91025 – 5-2.12 Screw Size, 8mm Length, 7.5mm x 13mm Hole – Zinc Finish Splash Shield Retaining Nuts (use w/ #13260 & #10937)

90022 – 5mm Torx Screw, Size 30mm O.D. Flange – Zinc Finish Splash Shield Retainer (use w/ #13260 & #13256)